Construction Hard Safety Work Helmet

The details of Construction Hard Safety Work Helmet as follow

Description

PE plastic body

Four-point double layer lining 

1.The helmet has the following six basic properties: impact resistance, penetration resistance, low temperature resistance, combustion resistance, electrical insulation performance, and lateral rigidity. Light, low-hazard helmets with good air permeability; Well-ventilated, lightweight, providing overall comfort for the wearer; The protective effect of the helmet.

2.When wearing a helmet, do not wear a crooked, do not wear the brim of the hat on the back of the head, so as not to reduce the impact resistance of the helmet.

3. The jaw belt of the helmet needs to be buckled to stand under the jaw, and while ensuring comfort, it needs to be securely tied. Lest the helmet be blown off by the wind, or touched by other obstacles, or due to the front and back swing of the head, the helmet will fall off.

4. In addition to the top of the helmet body, the top of the hat body is installed with a cap lining inside the cap body, and some also open small holes for ventilation. However, in the process of use, do not force the hole in the helmet for ventilation, so as not to reduce the strength of the helmet.

5. In the process of using the safety helmet, it is necessary to check the safety helmet regularly to avoid using the damage to the safety helmet. The helmet can be checked for cracks, concaves, cracks and wear, etc., if there is such a phenomenon, it should be replaced in time and no longer used. If the helmet has been hit hard and cracked, it should be scrapped, regardless of damage.

Hot Tags: construction hard safety work helmet, China construction hard safety work helmet suppliers, factory, palm coated nylon pu gloves, safety gloves, welding work gloves, construction rubber gloves, multifunctional welding helmet, auto darkening welding helmet